GENERAL ADHESIVES -- URETHANE ADHESIVE, 69X2643  -- 8040-00N081150
<pre>=====================  Product Identification  =====================

Product ID:URETHANE ADHESIVE, 69X2643
MSDS Date:02/04/1988
FSC:8040
NIIN:00N081150
=== Responsible Party ===
Company Name:GENERAL ADHESIVES
Address:6100 CENTENNIAL BLVD
City:NASHVILLE
State:TN
ZIP:37209
Country:US
Info Phone Num:615-350-8555
Emergency Phone Num:615-350-8555;615-350-8989
CAGE:OFXY2
=== Contractor Identification ===
Company Name:GENERAL ADHESIVES AND CHEMICAL COMPANY
CAGE:OFXY2
Company Name:IGI ADHESIVES INC (WAS GENERAL ADHESIVES INC)
Address:6100 GENTENNIAL BLVD
Box:City:NASHVILLE
State:TN
ZIP:37209
Country:US
Phone:615-350-8555
CAGE:0FXY2

=============  Composition/Information on Ingredients  =============

Ingred Name:FURAN, TETRAHYDRO-; (TETRAHYDRAFURAN (THF)) (CERCLA)
CAS:109-99-9
RTECS #:LU5950000
OSHA PEL:200 PPM
ACGIH TLV:200 PPM; 250 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:2-BUTANONE; (METHYL ETHYL KETONE) (SARA 313) (CERCLA)
CAS:78-93-3
RTECS #:EL6475000
OSHA PEL:200 PPM
ACGIH TLV:200 PPM; 300 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ACETONE (SARA 313) (CERCLA)
CAS:67-64-1
RTECS #:AL3150000
OSHA PEL:1000 PPM
ACGIH TLV:750 PPM; 1000 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:TOLUENE (SARA 313) (CERCLA)
CAS:108-88-3
RTECS #:XS5250000
OSHA PEL:200 PPM
ACGIH TLV:50 PPM, S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:SUPP DATA: GET MED ATTN. CONT LENSES SHOULD NOT BE WORN
    WHEN WORKING W/PROD. INHAL: MOVE EXPOS PERSON TO FRESH (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5: AIR AT ONCE. IF BRTHG CONTINUES TO BE DFCLT, ADMIN
    OXYGEN UNTIL MED ASSIST CAN BE RENDERED. IF BRTHG (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: STOPS, BEGIN ARTIFICIAL RESPIRATION. KEEP AFFECTED
    PERSON WARM AND AT REST. GET MED ATTENTION AS SOON AS POSS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: UNLIKELY ROUTE OF
    EXPOS. PERSONS INGESTING THIS PROD MAY EXPERIENCE NUMBNESS, RESP
    TRACT IRRIT & MUSCLE WEAKNESS. SKIN: PROD IS DEFATTING AGENT & CAN
    CAUSE DERM/SKIN IRRIT UPON PRLNGD/R PTD CONT. EYES: MAY CAUSE IRRIT
    OF EYES. INHAL: OVEREXP TO PROD MAY CAUSE LIGHTHEADEDNESS, NAUS,
    DIZZ, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: GIDDINESS/BRTHG DFCLTYS. SEV OVEREXP
    MAY CAUSE UNCON & ASPHYX. CHRONIC: INHAL: DMG TO CNS, LIVER, &
    KIDNEY COULD RSLT FROM CHRONIC CONTINUAL OVEREXP. TOLUENE APPEARS
    ON NAVY LISTING OF OCCUP  CHEM REPROD HAZS. SEEK CONSULTATION FROM
    APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE
    HNDLG(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMIT. GET MED ATTN IMMED. SKIN:
    PROMPTLY WASH CONTAMD AREA W/SOAP & WATER/SKIN CLEANSER. IF IRRIT
    PERSISTS AFTER WASHING, GET MED ATTN. IF PROD SOAKS THRU CLTHG,
    REMOVE CLTHG IM MED & WASH AFFECTED AREA. WET CLTHG SHOULD BE
    PLACED IN SAFETY CNTNR & NOT REWORN UNTIL CLTHG HAS BEEN LAUNDERED.
    EYES: WASH IMMED W/LRG AMTS OF WATER FOR AT LST 15 MINS, LIFTING
    UPPER & LOWER(SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<0F,<-18C
Lower Limits:1.2%
Upper Limits:12.8%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, HALON.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE AND ELIMINATE ALL SOURCES OF IGNITION.
    VENTILATE AREA OF SPILL OR LEAK. FOR SMALL QUANTITIES ABSORB ON
    PAPER TOWELS. LARGE QUANTITIES SHOULD BE RETAINED BY DIKING AND
    ABSORBED WITH ABSORBENT MA TERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP PRODUCT CONTAINERS COOL, DRY AND
    AWAY FROM SOURCES OF IGNITION. USE AND STORE PRODUCT WITH ADEQUATE
    VENTILATION.
Other Precautions:PRODUCT SHOULD NOT BE ALLOWED TO ENTER CONFINED
    SPACE, SUCH AS SEWER, BECAUSE OF POSSIBILITY OF VAPOR BUILD-UP,
    POSSIBLY ALLOWING EXPLOSION. PERSONS SHOULD AVOID BREATHING VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATIONAL
    EXPOSURE LIMITS USE NIOSH APPROVED RESPIRATOR TO PREVENT
    OVEREXPOSURE. USE EITHER NIOSH APPRVD SELF-CONTAINED AIR SUPPLIED
    RESPIRATOR OR ORGANIC VAPOR RESPI RATOR.
Ventilation:LOC EXHST GEN REQD TO REDUCE EXPOS TO BELOW OSHA ALLOWABLE
    LEVS. MECH (GEN) NOT GENERALLY REQD IF LOC EXHST VENT(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
    IMPERVIOUS CLTHG SHOULD BE WORN TO PVNT RPTD/PRLNGD SKIN CONT W/
    (SUPDAT)
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER OR SKIN CLEANSER
    BEFORE EATING, DRINKING, SMOKING, OR USING TOILET FACILITIES.
Supplemental Safety and Health
SOL IN H*2O: ACETONE AND MEK ARE SLIGHTLY WATER SOLUBLE. EFTS OF
    OVEREXP: & EXPOS INFO . VENT: IF PROVIDED. IF ROOM AIR IS NOT
    RECIRCULATED, BUT EXHAUSTED, MAY BE ADEQ. USE EXPLO PROOF MOTOR & F
    IXTURES ONLY. OTHER PROT EQUIP: PROD INLIQ STATE. FIRST AID PROC:
    LIDS OCCAS. IF IRRIT PERSISTS AFTER WASHING, (ING 5)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>133F,>56C
Vapor Pres:121 @ 20C
Vapor Density:>1
Spec Gravity:0.871 (H*2O=1)
Evaporation Rate &amp; Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:PARTIALLY-(SUPDAT)
Appearance and Odor:NATURAL COLOR, SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND ACIDS.
Stability Condition to Avoid:STRONG OXIDIZERS, FLAME, SPARK OR EXTREME
    HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, HCL.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAMINATED ABSORBENT MATERIAL OR WASTE PRODUCT
    MUST BE DISPOSED OF IN ACCORDANCE WITH REGULATIONS IN RESOURCE
    CONSERVATION AND RECOVERY ACT AND/OR FEDERAL, STATE, LOCAL OR EPA
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.